3 Water Softener Issues that You Need to Have an Expert Correct

View of a water softener system

Every homeowner in Salt Lake City understands that proper care and maintenance is essential to maximize the performance of their water softeners. Nevertheless, some issues are inevitable. Once in a while, they will the need to hire a water softener repair specialist who could correct them. Here are three water softener issues that you need an expert to correct.

Resin beads

You only need to use resin beads when working with salt-based water softeners. These beads usually can last the lifetime of the water softener. They may not work, however, to their maximum potential when they disintegrate. If your water-softening system demands that you keep recharging it, then the issue most likely lies in the fact that the performance of these beads has depreciated.

Blockages

Every system that has substances flowing through it could get blocked, and water softeners are no exception. Minerals and salts accumulate to create deposits that eventually block the path to the storage tank. The brine line and filter screens are the two common areas where these blockages occur.

Salt bridges

With consistent usage, salt builds up inside the water softener tank. In extreme cases, the salt deposit forms hard sodium piles, also known as a salt bridge. So, if your water softener is running but does not soften water, you might have a salt bridge problem on your hands. Check the base of the tank to determine it that’s what’s blocking the water.

Furthermore, the salt bridge will prevent the system from undergoing a typical regeneration cycle, altering the performance of the water softener.

READ  Throw Traditional Designs Out the Window

The above are the three common issues with salt-based water softeners. It is important to note that the proper care and maintenance of your water softener will minimize the chances of any issues from developing.